This quick page technique takes the power of three to the next level. Create a lovely classic design in little time.
Objective: Use shapes and the Arrange tools to create a quick page design.

Video Notes:

Large photo holders:

- - Insert> Photos> Empty frame
    - Add three empty frames
    - Position all three photos in a vertical line 1.5 inches from the left side of the page.

Note: The photos should come in on your page at exactly 1/3 the height of the page allowing them to fill the height of the page perfectly. If they do not, use the Quick Access Toolbar (QAT) to manually size your photo holders. Square projects will result in square photos. Rectangular projects (i.e. 11x8.5) will result in rectangular photos. You may adjust the width of your photos as desired.

Small photo holders:

- - Insert> Photos> Empty frame
    - Use the QAT to to make the width and height of the photo holder 1 inch smaller.
      - ie. In a 10x10 project, the width and height will both be 3.33. You will change both the width and height to 2.33.
  - Use the alignment helpers to center the small photo holder vertically with the middle larger photo holder
  - CTRL-C to copy the smaller photo holder
  - CTRL-V to paste the smaller photo holder
    - Position the copy directly above the original
  - CTRL-V to paste the smaller photo holder a second time
    - Position the copy directly below the original
  - Select all three of the small photo holders, use the QAT arrange tools to evenly space them vertically (second to last button)

Rectangles:

- - Insert> Content> Shape> Rectangle
    - Position the photo so that it is at the top and 1 inch from the left side of the page
    - Stretch the width of the rectangle until it is 1 inch before the end of the page
    - Make the rectangle the full height of the page
    - Click Create
    - Use the elements panel to position the rectangle at the bottom of the page
  - Insert> Content> Shape> Rectangle
    - Position the photo so that it is just inside the first rectangle
    - Stretch the width of the rectangle until it is just before the outer edge of the small photo holders
    - Make the rectangle the full height of the page
    - Click Create
    - Use the elements panel to position the rectangle below the photo holders and on top of the previous rectangle
  - Insert> Content> Shape> Rectangle
    - Position the rectangle to the right of the large photo holders
    - Make the width 0.5 - 1 inch wide
    - Make the rectangle the full height of the page
    - Click Create
    - Use the elements panel to position the rectangle under the photo holders and above the previous rectangles

Banners:

- - Insert> Content> Shape> Rectangle
    - Position and anchor the rectangle to the top small photo holder
    - Size the rectangle so that it is landscape and your desired size
    - Click Create
  - Right click the rectangle> Shape> Edit shape
    - Click between the two right points to add another point
    - Pull the point slightly into the rectangle
    - Click OK
  - CTRL-C to copy the banner
  - CTRL-V 2xs to paste the banner twice
  - Position and resize the banners as desired
  - Fill with content, photos, and add journaling and a title.

Video Tidbit: Power of Three Quick Page